Mining Ball Valves Manufacturers Introduce The Installation Precautions Of Check Valve

Mining Ball Valves Manufacturers introduce the installation precautions of check valves:

(1) When placing the pipeline, care should be taken to make the passing direction of the wafer check valve consistent with the flow direction of the fluid;

(2) Avoid adding pipe joints and obstructions within the operating radius of the valve plate;

(3) Do not install a reducing pipe in front of or behind the wafer check valve;

(4) When installing the wafer check valve near the elbow, pay attention to leaving enough space;

(5) When installing a wafer check valve at the pump outlet, at least a space of six times the diameter of the valve should flow out to ensure that the butterfly plate is affected by fluid.

(6) Installed in a vertically placed pipeline, for a horizontally placed pipeline, a wafer check valve is placed vertically;

(7) Use a telescopic tube between the wafer check valve and the butterfly valve, and do not connect it directly with other valves;