High Pressure Ball Valves Manufacturers Introduces The Characteristics And Applications Of Ball Valves

Ball valves are one of the most common valves in the valve industry. Whether they are automatic valves or manual valves, they can be found everywhere, such as electric stainless steel ball valves, electric PVC ball valves, electric flange ball valves; or pneumatic sanitary ball valves. / Pneumatic welded ball valve, pneumatic high-pressure ball valve; manual one-piece ball valve, two-piece ball valve, three-piece ball valve, and so on. Below, High-Pressure Ball Valves Manufacturers introduces the characteristics and applications of ball valves:

1. Simple structure, small size, and lightweight.

2. The fluid resistance is small, and the full-bore ball valve has almost no resistance.

3. Good sealing performance. The ball valve has two sealing surfaces, and the seal of the hard-sealed ball valve is manually ground until the valve core and the sealing ring are completely matched before use. Such as corrosion-resistant ball valves, various plastics are widely used in the valve body, with good sealing performance, and are widely used in vacuum environments.

4. The switch is light: since the bottom of the sealing ring is made of springs, the sealing ring and the valve core are tightly hugged together, so the switch is very light when the external force exceeds the pre-tightening force of the spring.

5. Easy to operate. As a valve to switch, cut off or change the flow direction of the medium, the ball valve only needs to be rotated 90 degrees during use, and the torque is small.

6. Wide scope of application and application. The diameter of the ball valve ranges from a few millimeters to a few meters and can be used from high altitude to high pressure. Moreover, in the fields of petroleum, chemical industry, power generation, papermaking, atomic energy, aviation, and rockets, ball valves have been widely used.

7. Long service life: Pneumatic ball valve has a compact structure, reliable sealing, simple structure, and convenient maintenance, the sealing surface and spherical surface are often in a closed state, so it is not easy to be eroded by the medium, and it is also easy to operate and maintain, which is more suitable In general working media such as water, acid, solvent, and natural gas.