Hydraulic Valves Factory introduces hydraulic valve cleaning methods as follows:
1. Remove surface dirt, especially impurities on the installation surface. Proper tools should be used for cleaning, and metal materials should not be used to avoid damage to the surface. Due to its strict surface flatness requirements, special attention should be paid to the cleaning of the installation surface.
2. Disassemble the hydraulic valve according to the instructions. Use as much force as possible to avoid damage.
3. After soaking, you can use a special cleaning agent for hydraulic valves, or diesel, gasoline, etc., but pay attention to safety. The air bubbles generated by compressed air can be used to clean the interior under the action of agitation to achieve a better cleaning effect. If conditions permit, an ultrasonic cleaner can be used.
4. For the situation where there are many impurities in the hydraulic valve, the designated position can be cleaned with a high-pressure gun. When using cleaning agents, pay attention to choosing non-corrosive liquids.